XPOWER XD-165L Low Grain Refrigerant (LGR) Dehumidifier, 165 Pint

The XPOWER XD-165L Low Grain Refrigerant (LGR) Dehumidifier is the newest member of the XPOWER LGR dehumidifier line. The XD-165L LGR Dehumidifier achieves maximum humidity control and water removal efficiency. This all new “XXL” category unit is capable of removing up to 165 Pints per day @ AHAM (80°F, 60% RH) and 280 pints per day at full saturation (90°F, 90% RH).

The XD-165L LGR Dehumidifier has an electronic display that assists in monitoring the temperature and humidity at the exhaust, as well as recording the total operating life of the dehumidifier. Lay flat ducting can be applied to the exhaust point of the dehumidifier with the dual ducting ring that is included on the unit to transport warm/dry air to where it is needed. It is easily done by hand without any additional tools. The XPOWER XD-165L LGR Dehumidifier also features an auto purge condensate pump, superior compared to industry competitors, that is capable of purging collected moisture through the provided 40′ drainage hose.

Weighing 121 lbs. with rugged wheels and a telescoping handle, the ultra-mobile XD-165L gives you class leading LGR performance. Roto-molded Polyethylene Plastic provides a durable housing that is capable of enduring the most rugged restoration job sites.

Features:

• The ready to use XD-165L LGR Dehumidifier includes a fully assembled telescoping handle with wheels to simplify transportability and a convenient power cord + drainage hose compartment
• Auto purge pump with drainage hose automatically purges when full: eliminating the need to monitor and manually empty the water reservoir
• Automatic speed control increases or decreases the fan speed based on the relative humidity and ambient temperature levels in the space requiring dehumidification
• Water removal capacity: 165 pints/day at AHAM (80°F, 60% RH); 280 Pints/Day at Saturation (90°F, 90% RH)
• LGR performance with an operating range between 33°F - 105°F (0.6°C - 40.6°C)
• Optimal dehumidification process with low efficient 10.2 Amps draw
• 476 CFM of warm, dry air passes through the exhaust to help optimize drying capability
• Dual ducting exhaust capabilities and digital display monitors current humidity and operating time
• Stackable up to 2 units high and durable and rugged roto-mold housing
• 25 ft. power cord and 40 ft. long drain hose
• ETL/CETL safety certified and meets OSHA safety requirements
• Xactimate code for professional water damage estimates: WTRDHM>XXL