Exceptional performance and a full array of user-friendly features have made the Abatement Technologies® PAS2400 Portable Air Scrubber* a popular choice for capturing airborne particles during facility construction and renovation.
With peak tested airflow of up to 2,100 cfm, and a maximum static lift of 5.5”, it’s the highest output Portable Air Scrubber that is NRTL-certified to operate safely on a 120 V/15 amp electrical supply.
Specifications:
- Rated Airflow*: 700-2,100 cfm
- Air Changes Per Hour: 6 ACH in areas up to 18,000-21,000 ft³
- Net Weight with Filters: 170 pounds
- Dimensions (L x W x H): 31.50”L x 25.25”W x 49.75”H
- Power Supply Requirements: 120 VAC, 60Hz, 15 amps
- Normal Operating Current: 12 amps or less (safe for 15A circuits)
- Electrical Safety: NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
- Motor: High-efficiency type, 3,450 RPM, 1.5 HP
- AT Gold Blower: Anodized-Aluminum, 5.5” peak static lift
- Controls: Off/High/Low speed selector switch, green power indicator lamp, separate amber ‘Replace Pre-filter’ and ‘replace HEPA’ lamps, hour meter, resettable pop-out 12A circuit breaker
- Cabinet Material: 20 gauge stainless steel construction with solid, aircraft-type rivets
- Built-in Dolly: Two-wheel dolly with 10” solid, non-marking rubber rear wheels, 360° swivel front casters and a secure top handle for easy movement & control
- Easy to Replace Pre-Filters: Hinged and latched pre-filter access door with a full perimeter gasket seal to protect against dirty-air bypass
- Pre-Filter Mounting: Separate slide-in compartments for up to 3 pre-filter stages
Filters:
- F1821: Stage 1 pre-filter - Inexpensive, 1”-deep FIBER-TRAPPER® 1.0 pre-filter for larger particulates (100+ microns); can be washed & reused, or treated as a disposable
- H1902: Stage 2 pre-filter - Pleated, 2”-deep filter for medium-sized particulates (10-100 microns)
- VL2002: Stage 3 pre-filter (not included) - High-capacity 2"-deep VAPOR-LOCK® carbon filter for gases & odors
- H2418-99: Final stage HEPA filter - High-capacity, for 0.1-10 micron particles, certified test efficiency of 99.97% or higher @ 0.3 microns, metal-frame
- H1980P: Inlet/Outlet Manifold - Molded slide-in plastic manifold for attaching 12” inlet or outlet ducting (one included)
