Mold Inspection Consulting and Remediation Organization
Since 2006
close menu

FOAMit SS3 Walk-Through Footwear Sanitizing Unit

Easy-to-use walk-through footwear sanitation system for entryways and transition zones. Powered by compressed air and draws from pre-mixed solution.

More info

FOAMit SS3 Walk-Through Footwear Sanitizing Unit
Roll over image to zoom Click image to expand
  • FOAMit SS3 Walk-Through Footwear Sanitizing Unit

Easy-to-use walk-through footwear sanitation system for entryways and transition zones. Powered by compressed air and draws from pre-mixed solution.

Features:

  • easy-to-use walk-through sanitation for entryways and transition zones
  • users can enter from either side to smooth traffic flow in busy areas
  • walk-through design ensures compliance
  • low-moisture system
  • air-operated pump delivers a consistent amount of sanitizer (0.4 oz/11.81 mL) per spray
  • collection basin is easy to access or swap out for cleaning
  • draws from pre-mixed solution
  • works with our chemical jugs or your chosen chemical reservoir with ¼ in. suction line
  • powered by compressed air
  • easy to disassemble and clean
  • adjustable leveling feet
Specifications
power type compressed air
chemical pickup type draws from pre-mixed solution
number of products unit can draw from one product
suction line length/diameter 3 ft (0.9 m) clear hose with 1/4 in. (6.4 mm) inside diameter
output volume* 0.4 oz (11.83 mL)
flow rate* 0.4 oz (11.83 mL)
pump seals Viton
number of nozzles 8
product dimensions 29.5 x 28 x 42 in. (74.9 x 20.3 x 106.7 cm)

*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.