The MMH800 Pin/Pinless Moisture Meter with Temperature and Humidity is ideal for locating water leaks and measuring the moisture content of drywall, plastered walls, floors and subfloors.
Features:
- Pin-type + non-invasive inductive moisture sensors
- Two dedicated displays: Moisture percentage, and ambient temperature plus relative humidity (RH)
- Audible and visual indications of high, medium and low moisture levels
- °F/°C switch
- Data hold
- Auto diagnostic check
- #PIND4E replacement pins are available
- The pin cover doubles as a calibration checker
- Battery charge indication
- Auto power off
Specifications:
- Moisture measurement ranges: 5 to 50%WME (Wood Moisture Equivalent) for wood; 1.5 to 33% for building materials
- Moisture measurement accuracy/resolution: ±3% in pin mode/0.1%
- Temperature measurement range/accuracy: 32° to 140°F (0° to 60°C)/±5.4°F (±3°C)
- RH measurement range/accuracy: 25 to 95%/±5% below 75%RH; ±10% above 75%
- Pin length: 0.28 in. (7mm)
- Display type and size: 99.9 count LCD with 0.56 in. (15mm) high digits
- Auto power off: After 3 minutes with 0% reading
- Operating temperature: 32° to 122°F (0° to 50°C) @ <80% RH
- Weight (without battery): 4 oz. (115g)
- Power source: "9V" battery (included)
Includes:
- PIND4E replacement pins
- Custom hard plastic carrying case
- Battery
- 1-year limited warranty
