The Ligno-Scanner SD is a dual depth pinless moisture meter that is convenient to use. The operation is simple with clearly marked buttons.
Above all Lignomat’s measuring technology assures calibration accuracy. Every time the pinless moisture meter turns on, calibration is internally checked.
The dual depth pinless moisture meter has a built-in correction for different wood species. Corrections can be programmed, just enter the specific gravity of the wood between 0.3 and 1.0. Resolution is 0.1% for entire measuring range. HOLD function is available for all pinless moisture meters from Lignomat.
The Ligno-Scanner SD dual depth moisture meter is calibrated for wood. The meter has 2 independent sets of calibrations, one for 1/4″ deep and one for 3/4″ deep. Most pinless moisture meters have a 3/4″ measuring depth.
| Specifications |
Measuring
Range |
5-60% dependent upon species setting* |
| Display |
0.1% resolution for the entire range. |
Species
Corrections |
71 wod group settings, or simpy use the specifi graviy of the wood, betwee 0.3 and 1.0 (setting 30-100) |
| Measuring Depth |
Dual depth measuring capabilities at 1/4″ and 3/4″ |
Reference
Scale |
0-99 for non-wood building materials |
Calibration
|
Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
| Calibration Check |
External calibration check block #TS is available to verify the calibration and functions of meter. |
| Included |
Pouch, one 9V battery, manual and laminated wood group chart. |
| Size |
Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
| Weight |
8 ounces (200g), made out of high-impact plastic |
| Warranty |
All moisture meters have a 2 year warranty. Pins and battery are excluded. |
