FLIR is proud to announce the new MR160 imaging moisture meter featuring Infrared Guided Measurement (IGM) technology – the only moisture meter with the power to show your customers exactly where to measure.
Equipped with a built-in thermal imager, the FLIR MR160 displays temperature patterns that point to potential hidden moisture, so they’ll know right where to place the meter probe to capture accurate readings. MR160 is your go-to troubleshooting tool right out of the box: Identify cold spots with the built-in, 80×60-resolution thermal imager to locate areas of moisture. Verify the actual moisture level using the meter’s pin and pinless moisture measurement functionality.
Capture thermal images and moisture readings on one screen, then generate reports with free FLIR Tools software. Easily investigate insulation and moisture issues using MR160’s pinless technology or external pin probe for both non-destructive and contact measurements.
| OVERVIEW |
| Agency Approvals |
FCC class B, CE, UL |
| Dimensions (H x W x L) |
QVGA (320 x 240 pixel) 2.3" 64k color TFT |
| Laser Orientation |
Single laser pointer to center of thermal imag |
| Packaging Size |
12.1 cm x 14 cm x 33.1 cm |
| Warranty |
2 Yr Product, 10 Yr Thermal detector** |
| ENVIRONMENTAL |
| Drop test |
9.8’ (3m) |
| IMAGING & OPTICAL |
| Image Display |
Color moisture alert |
| Minimum Focus Distance |
10cm (4") |
| Spectral Response |
8–14µm |
| Thermal Image Resolution |
4800 pixels (80 × 60) |
| Thermal Imaging Detector |
FLIR Lepton® microbolometer |
| Field of View [W x H] |
51° × 38° |
| MEASUREMENT & ANALYSIS |
| Image Calibration |
Automatic |
| Image Frame Rate |
9 Hz |
| Measurement Resolution |
0.1 |
| Pin Moisture Groups |
9 material groups |
| Pin Moisture via Ext Probe Range [Accuracy] |
0–100% WME (± 5%) |
| Pinless Measurement Depth |
0.75" (19mm) Max |
| Pinless Moisture Range |
0–100 relative measurement |
| Response Time Pin Mode |
750ms |
| Response Time Pinless |
100ms |
| Thermal Sensitivity |
<0.15°C |
| OTHER |
| Certification Standards |
EN61326 (EMC), EN61010 (battery + charger), EN60825-1 class 2 (Laser) |
| POWER |
| Battery |
3.7 V, 3000 mAh Li-ion rechargeable via micro USB |
| Power Requirements |
Integrated rechargable battery |
| Battery power\Cont Run Time |
18 hours max |
| Battery power-Typical Usage |
4 work weeks |
| STORAGE MEDIA |
| Saved Image File format |
BMP with measurement values overlaid |
| Stored Image Capacity |
9999 images |
