Ligno-Versa Tec combines accurate and dependable measuring technologies of Lignomat's pin, pinless and RH meters.
With the Ligno-VersaTec you can choose the right measuring mode and the right accessories for the job on hand. It could be tracking moisture problems with a pin electrode or measuring humidity in a crawl space.
Floor installers can check a cupped floor using the dual-depth pinless mode. Pinless Search and Compare Mode is used when tracking moisture problems in walls, ceilings and floors. Lumber Processing Mills use the meter to make sure QC requirements are followed.
Pin and pinless side by side: Large areas can be scanned fast and easy. Selectable measuring depth 1/4″ or 3/4″ allows for comparing moisture close to the surface and deeper down. Once a problem is detected, pin electrodes can be used for further investigations.
RH mode: Add RH BluePeg humidity probe to the Ligno-VersaTec and you have a precision thermo-hygrometer for RH, T, GPP, DPT. Add RH concrete accessories to perform in-situ moisture tests in concrete. RH BluePeg system complies with latest ASTM F-2170 standard.
| SPECIFICATIONS |
| Properties |
Pin Mode |
Pinless Mode |
| Moisture Range |
5-99% * |
5-60%* |
| Resolution |
0.1% for entire measuring range |
same as pin meter |
| Measuring Depth |
Up to 2″ use E12 (5cm) Up to 7″ use E14. E16 (17.5cm) |
1/4 and 3/4″ deep 7 and 20mm |
| Wood Species Corrections |
over 125 individualized settings |
same as pin meter |
| Wood Temperature Corrections |
0°F to 210°F -10°C to 95°C |
not necessary |
| Reference Scale |
0-99 for non-wood building materials |
3 sensitivity levels wood, concrete, other materials |
| Calibration |
The calibration is internally checked before each reading and auto- matically adjusted if needed. Test blocks available. |
same as pin meter |
| Battery |
one 9V battery |
|
| Size |
2.5″x 4.75″ x 1″ (60x120x25mm) |
|
| Weight |
8 ounces (200g), made out of high-impact plastic |
|
| Electrodes |
Electrode or PK Probe required |
no attachments necessary |
