Whether you're calibrating instruments, troubleshooting a problem, or running routine maintenance, the Fluke 754 with HART® communication can help you get the job done faster. It does many different tasks quickly and it's the only process calibrator you need to carry. This rugged, reliable, integrated communicating calibrator is ideal for calibrating, maintaining, and troubleshooting HART smart transmitters and other instrumentation.
Measurement and source capabilities:
- AC/DC voltage
- mA loop w/ 24V loop power
- Pressure
- Thermocouples & RTDs
- Frequency
- Resistance
Enhanced process calibrator operation
With the bright white dual display, you’ll be able to read both sourced and measured parameters simultaneously. The rechargeable Li-Ion battery offers up to 10 hours uninterrupted usage allowing you to complete one task after another without needing to stop, and also includes direct AC power capabilities if needed. Finally, communicate with HART smart digital transmitters directly through the mA measurement jacks for seamless calibration with fewer connections.
Do more, with less
The 754 does the work of several tools. It sources, simulates and measures pressure, temperature, and electrical signals with one rugged, hand-held device. The powerful built-in HART interface can perform nearly all day-to-day tasks you now perform with a separate digital communicator. It can handle fast-pulsed RTD transmitters and PLCs, with pulses as short as 1 ms. The 754 also measures/sources pressure using any of the Fluke 750P Series Pressure Modules as a reference and boasts many additional features like:
- Custom auto-step and ramping
- Custom units
- User-entered values during test
- One-point and two-point switch testing
- Square root DP flow testing
- Programmable measurement delay
Download procedures, lists, and instructions
The 754 is a power multifunction documenting calibrator that you can use to download procedures, lists, and instructions created with software, or upload data for printing, archiving, and analysis. The tool can hold up to a full week of downloaded procedures and calibration results and offers compatibility with many asset management software. Users can also create and run automated as-found or as-left procedures to satisfy quality programs or regulations, and records and documents results.
For documentation, the 754 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA, and OSHA regulations. Plus, the graphical screen, Li-Ion battery for longer life, USB port, and accessories help you work smarter and faster.
Features:
- Complete pressure, temperature, and mA loop calibrator
- Troubleshoot and calibrate HART smart digital transmitters
- Create calibration procedures and automatically document results
- Connect to calibration management software
What's In The Box:
- Fluke 754 Documenting Process Calibrator-HART
- BC7240 battery charger
- Li-on BP7240 battery pack
- NIST-traceable calibration report and data
- (3 sets)TP220 test probes
- (3 sets) "extended tooth" alligator clips
- (2 sets) AC280 hook clips
- C799 Soft Field Case
- USB communication cable, Fluke 754HHC HART communications cable
- Quick Reference
Specifications:
| Voltage DC |
Range/ Resolution |
1 Year |
2 Years |
| 100.000 mV |
0.02% + 0.005 mV |
0.03% + 0.005 mV |
| 3.00000 V |
0.02% + 0.00005 V |
0.03% + 0.00005 V |
| 30.0000 V |
0.02% + 0.0005 V |
0.03% + 0.0005 V |
| 300.00 V |
0.05% + 0.05 V |
0.07% + 0.05 V |
| Voltage AC |
3.000 V (40 Hz to 500 Hz) / 0.001 V |
0.5% + 0.002 V |
1.0% + 0.004 V |
| 30.00 V (40 Hz to 500 Hz) / 0.01 V |
0.5% + 0.02 V |
1.0% + 0.04 V |
| 300.0 V (40 Hz to 500 Hz) / 0.1 V |
0.5% + 0.2 V |
1.0% + 0.2 V |
| Current DC |
30.000 mA |
0.01% + 5 uA |
0.015% + 7 uA |
| 110.00 mA |
0.01% + 20 uA |
0.015% + 30 uA |
| Resistance |
10.000 Ω |
0.05% + 50 mΩ |
0.07% + 70 mΩ |
| 100.00 Ω |
0.05% + 50 mΩ |
0.07% + 70 mΩ |
| 1.0000 kΩ |
0.05% + 500 mΩ |
0.07% + 0.5 Ω |
| 10.000 kΩ |
0.1% + 10 Ω |
0.15% + 15 Ω |
| Frequency |
1.00 to 110.00 Hz / 0.01 Hz |
|
0.05 Hz |
| 110.1 to 1100.0 Hz / 0.1 Hz |
|
0.5 Hz |
| 1.101 to 11.000 kHz / 0.001 kHz |
|
0.005 kHz |
| 11.01 to 50.00 kHz / 0.01 kHz |
|
0.05 kHz |
| Source Accuracy |
| |
|
1 Year |
2 Years |
| Voltage DC |
100.000 mV |
0.01% + 0.005 mV |
0.015% + 0.005 mV |
| 1.00000 V |
0.01% + 0.00005 V |
0.015% + 0.0005 V |
| 15.0000 V |
0.01% + 0.0005 V |
0.015% + 0.0005 V |
| Current DC |
22.000 mA (source) |
0.01% + 0.003 mA |
0.02% + 0.003 mA |
| Current sink (simulate) |
0.02% + 0.007 mA |
0.04% + 0.007 mA |
| Resistance |
10.000 Ω |
0.01% + 10 mΩ |
0.015% + 15 mΩ |
| 100.00 Ω |
0.01% + 20 mΩ |
0.015% + 30 mΩ |
| 1.0000 kΩ |
0.02% + 0.2 Ω |
0.03% + 0.3 Ω |
| 10.000 kΩ |
0.02% + 3 Ω |
0.03% + 5 Ω |
| Frequency |
0.1 to 10.99 Hz |
|
0.01 Hz |
| 0.01 to 10.99 Hz |
|
0.01 Hz |
| 11.00 to 109.99 Hz |
|
0.1 Hz |
| 110.0 to 1099.9 Hz |
|
0.1 Hz |
| 1.100 to 21.999 kHz |
|
0.002 kHz |
| 22.000 to 50.000 kHz |
|
0.005 kHz |
| Technical Data |
| Data log functions |
Measure functions |
Voltage, current, resistance, frequency, temperature, pressure |
| Reading rate |
1, 2, 5, 10, 20, 30, or 60 readings/minute |
| Maximum record length |
8000 readings (7980 for 30 or 60 readings/minute) |
| Ramp functions |
Source functions |
Voltage, current, resistance, frequency, temperature |
| Rate |
4 steps/second |
| Trip detect |
Continuity or voltage (continuity detection not available when sourcing current) |
| Loop power function |
Voltage |
Selectable, 26 V |
| Accuracy |
10%, 18 V minimum at 22 mA |
| Maximum current |
25 mA, short circuit protected |
| Maximum input voltage |
50 V DC |
| Step functions |
Source functions |
Voltage, current, resistance, frequency, temperature |
| Manual step |
Selectable step, change with arrow buttons |
| Autostep |
Fully programmable for function, start delay, stepvalue, time per step, repeat |
| Environmental Specifications |
| Operating temperature |
-10°C to +50°C |
| Storage temperature |
-20°C to +60°C |
| Dust/water resistance |
Meets IP52, IEC 529 |
| Operating altitude |
3000 m above mean sea level (9842 ft) |
| Safety Specifications |
| Agency approvals |
CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993 |
| Mechanical and General Specifications |
| Size |
136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in) |
| Weight |
1.2 kg (2.7 lb) |
| Batteries |
Internal Battery Pack Li-ion: 7.2V,4400mAh, 30 Wh |
| Battery life |
>8 hours typical |
| Battery replacement |
Replace without opening calibrator; no tools required |
| Side port connections |
Pressure module connector |
| USB Connector to interface to your PC |
| Digital instrument (HART) connector |
| Connection for optional battery charger/eliminator |
| Data storage capacity |
1 week of calibration procedures results |
| 90 day specifications |
The standard specification interval for the 750 Seriesare 1 and 2 years. |
| Typical 90 day measurement and source accuracy can be estimated by dividing the one year "% of reading" or "% of output" specifications by 2. |
| Floor specifications, expressed as "% of full scale" or "counts" or "ohms" remain constant. |
| Temperature, Resistance Temperature Detectors |
| Degrees or % of reading - Type (α) |
Range °C |
Measure °C1 |
| |
1 year |
2 year |
| 100 Ω Pt (385) |
-200 to 100
100 to 800 |
0.07°C
0.02% + 0.05°C |
0.14°C
0.04% + 0.10°C |
| 200 Ω Pt (385) |
-200 to 100
100 to 630 |
0.07°C
0.02% + 0.05°C |
0.14°C
0.04% + 0.10°C |
| 500 Ω Pt (385) |
-200 to 100
100 to 630 |
0.07°C
0.02% + 0.05°C |
0.14°C
0.04% + 0.10°C |
| 1000 Ω Pt (385) |
-200 to 100
100 to 630 |
0.07°C
0.02% + 0.05°C |
0.14°C
0.04% + 0.10°C |
| 100 Ω Pt (3916) |
-200 to 100
100 to 630 |
0.07°C
0.02% + 0.05°C |
0.14°C
0.04% + 0.10°C |
| 100 Ω Pt (3926) |
-200 to 100
100 to 630 |
0.08°C
0.02% + 0.06°C |
0.16°C
0.04% + 0.12°C |
| 10 Ω Cu (427) |
-100 to 260 |
0.2°C |
0.4°C |
| 120 Ω Ni (672) |
-80 to 260 |
0.1°C |
0.2°C |
| Source current |
Source °C |
Allowable current2 |
| |
1 year |
2 year |
|
| 1 mA |
0.05°C
0.0125% + 0.04°C |
0.10°C
0.025% + 0.08°C |
0.1 mA to 10 mA |
| 500 μA |
0.06°C
0.017% + 0.05°C |
0.12°C
0.034% + 0.10°C |
0.1 mA to 1 mA |
| 250 μA |
0.06°C
0.017% + 0.05°C |
0.12°C
0.034% + 0.10°C |
0.1 mA to 1 mA |
| 150 μA |
0.06 C
0.017% + 0.05°C |
0.12 C
0.034% + 0.10°C |
0.1 mA to 1 mA |
| 1 mA |
0.05°C
0.0125% + 0.04°C |
0.10°C
0.025% + 0.08°C |
0.1 mA to 10 mA |
| 1 mA |
0.05°C
0.0125% + 0.04°C |
0.10°C
0.025% + 0.08°C |
0.1 mA to 10 mA |
| 3 mA |
0.2°C |
0.4°C |
0.1 mA to 10 mA |
| 1 mA |
0.04°C |
0.08°C |
0.1 mA to 10 mA |
1. For two and three-wire RTD measurements, add 0.4°C to the specifications.
2. Supports pulsed transmitters and PLCs with pulse times as short as 1 ms |
| Temperature, Thermocouples |
| Type |
Source °C |
Measure °C |
Source °C |
| |
|
1 year |
2 years |
1 year |
2 years |
| E |
-250 to -200 |
1.3 |
2.0 |
0.6 |
0.9 |
| -200 to -100 |
0.5 |
0.8 |
0.3 |
0.4 |
| -100 to 600 |
0.3 |
0.4 |
0.3 |
0.4 |
| 600 to 1000 |
0.4 |
0.6 |
0.2 |
0.3 |
| N |
-200 to -100 |
1.0 |
1.5 |
0.6 |
0.9 |
| -100 to 900 |
0.5 |
0.8 |
0.5 |
0.8 |
| 900 to 1300 |
0.6 |
0.9 |
0.3 |
0.4 |
| J |
-210 to -100 |
0.6 |
0.9 |
0.3 |
0.4 |
| -100 to 800 |
0.3 |
0.4 |
0.2 |
0.3 |
| 800 to 1200 |
0.5 |
0.8 |
0.3 |
0.3 |
| K |
-200 to -100 |
0.7 |
1.0 |
0.4 |
0.6 |
| -100 to 400 |
0.3 |
0.4 |
0.3 |
0.4 |
| 400 to 1200 |
0.5 |
0.8 |
0.3 |
0.4 |
| 1200 to 1372 |
0.7 |
1.0 |
0.3 |
0.4 |
| T |
-250 to -200 |
1.7 |
2.5 |
0.9 |
1.4 |
| -200 to 0 |
0.6 |
0.9 |
0.4 |
0.6 |
| 0 to 400 |
0.3 |
0.4 |
0.3 |
0.4 |
| B |
600 to 800 |
1.3 |
2.0 |
1.0 |
1.5 |
| 800 to 1000 |
1.0 |
1.5 |
0.8 |
1.2 |
| 1000 to 1820 |
0.9 |
1.3 |
0.8 |
1.2 |
| R |
-20 to 0 |
2.3 |
2.8 |
1.2 |
1.8 |
| 0 to 100 |
1.5 |
2.2 |
1.1 |
1.7 |
| 100 to 1767 |
1.0 |
1.5 |
0.9 |
1.4 |
| S |
-20 to 0 |
2.3 |
2.8 |
1.2 |
1.8 |
| 0 to 200 |
1.5 |
2.1 |
1.1 |
1.7 |
| 200 to 1400 |
0.9 |
1.4 |
0.9 |
1.4 |
| 1400 to 1767 |
1.1 |
1.7 |
1.0 |
1.5 |
| C |
0 to 800 |
0.6 |
0.9 |
0.6 |
0.9 |
| 800 to 1200 |
0.8 |
1.2 |
0.7 |
1.0 |
| 1200 to 1800 |
1.1 |
1.6 |
0.9 |
1.4 |
| 1800 to 2316 |
2.0 |
3.0 |
1.3 |
2.0 |
| L |
-200 to -100 |
0.6 |
0.9 |
0.3 |
0.4 |
| -100 to 800 |
0.3 |
0.4 |
0.2 |
0.3 |
| 800 to 900 |
0.5 |
0.8 |
0.2 |
0.3 |
| U |
-200 to 0 |
0.6 |
0.9 |
0.4 |
0.6 |
| 0 to 600 |
0.3 |
0.4 |
0.3 |
0.4 |
| BP |
0 to 1000 |
1.0 |
1.5 |
0.4 |
0.6 |
| 1000 to 2000 |
1.6 |
2.4 |
0.6 |
0.9 |
| 2000 to 2500 |
2.0 |
3.0 |
0.8 |
1.2 |
| XK |
-200 to 300 |
0.2 |
0.3 |
0.2 |
0.5 |
| 300 to 800 |
0.4 |
0.6 |
0.3 |
0.6 |
