The PCE-GA 12 leak detector is an exceptionally user-friendly measuring instrument. It is designed to detect combustible gases and emits both vibrating and audible alarms upon detection. The device's semi-rigid hose allows the sensor to be positioned in nearly any orientation, reaching even the most inaccessible areas.
This feature makes the device ideal for employees needing to sporadically detect gas leaks (such as during plant inspections, engine and supply line checks, and gas supply line testing). Manual calibration of the leak detector is not required as it automatically calibrates itself.
Features:
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- Measuring range up to 10000 ppm
- For the detection of combustible gases
- Durability of the sensor about 5 years
- Vibrating alarm when detecting gases
- Sensor changeable
What's In The Box:
- 1 x Leak detector PCE-GA 12
- 1 x Charger
- 1 x User manual
| Specifications |
| Measuring range |
At low concentration 0 ... 1000 ppm |
| (only for methane) |
At high concentration 0 ... 10000 ppm |
| Acoustic alarm |
Volume: 85 dB |
| Sensitivity |
< 10 ppm (with methane) |
| Measuring interval |
< 2 seconds |
| Display |
Measurement of combustible gases |
| |
on the LC display, bar graphs |
| Calibration |
Automatically |
| Warming up |
40 seconds |
| Battery |
Polymer Li-ion battery 18500 3.7V |
| Power adapter |
Primary side: 100 ... 240V, 50/60 Hz, 0.2 A |
| |
Secondary side: 5V, 1 A |
| Automatic shutdown |
Turns off if the battery capacity is too low |
| |
by itself or after 10 minutes if not used. |
| Sensor durability |
About 5 years (sensor is interchangeable) |
| Probe |
Semi-rigid 400 mm / 16" |
| Weight |
About 430 g / < 1 lb |
